電工鋼硅鋼片Electrical steel, also known as silicon steel sheet, is an indispensable metal material in the power, electronics, and military industries, and is also the largest functional material in production. It is mainly used as the iron core for various motors, generators, and transformers. Since it is a functional material, its performance testing also revolves around "function". These indicators are often mentioned in trade and processing processes, and a brief understanding can help everyone better carry out their work. The performance testing of electrical steel mainly includes the following aspects: magnetic inspection, stacking coefficient inspection, coating adhesion inspection, repeated bending inspection, size and shape surface inspection, and conventional mechanical property inspection. In addition to the types of products listed above, there are also some special purpose electrical steel plates, such as 0.15 and 0.20mm thick 3％ Si cold-rolled non oriented silicon steel strips and 0.025, 0.05, and 0.1mm thick 3％ Si cold-rolled oriented silicon steel strips, which are used as intermediate and intermediate grade High frequency motors and transformers, as well as pulse transformers, etc； 0.7mm thick 3％ Si high-strength cold-rolled non oriented silicon steel plate for relays and power switches； High strength cold-rolled electrical steel plate for new high-speed motor rotors； Low carbon electrical steel hot-rolled thick and cold-rolled plates for magnetic shielding and high-energy accelerator electromagnets such as medical magnetic resonance tomography scanners； 4.5％ to 6.5％ Si high silicon steel plates for high-frequency motors, transformers, and magnetic shielding. Generally, motors, transformers, and other electrical components are required to have high efficiency, low power consumption, small size, and light weight. Electrical steel plates are usually guaranteed to have magnetic properties based on core loss and magnetic induction strength. Magnetic induction strength is the number of magnetic lines passing through a unit cross-sectional area of the iron core, also known as magnetic flux density. It represents the material‘s magnetization ability, measured in T. The magnetic induction strength of electrical steel plates is high, and the excitation current (also known as no-load current) of the iron core is reduced. Copper and iron losses are also reduced, which can save electrical energy. When the power of the motor and transformer remains constant, the magnetic induction intensity is high, and the design Bm can be increased. The cross-sectional area of the iron core can be reduced, which reduces the volume and weight of the iron core, and saves the amount of electrical steel plates, wires, insulation materials, and structural materials used. This can reduce the total loss and manufacturing cost of the motor and transformer, and is beneficial for the manufacturing, installation, and transportation of large transformers and motors. The main requirements for the performance of silicon steel are: 1. Low iron loss is the most important indicator of the quality of silicon steel sheets. Various countries classify grades based on iron loss values, with the lower the iron loss, the higher the grade. 2. Under strong magnetic fields, the magnetic induction intensity (magnetic induction) is high, which reduces the volume and weight of the iron core of the motor and transformer, saving silicon steel sheets, copper wires, and insulation materials. 3. The surface is smooth, flat, and the thickness is uniform, which can improve the filling coefficient of the iron core. 4. Good lamination performance is more important for manufacturing micro and small electric motors. 5. The adhesion and weldability of the surface insulation film are good, which can prevent corrosion and improve the punching performan

電工鋼硅鋼片硅鋼是一種硅鐵合金。用硅鋼軋制的片材是電工領域中應用廣的軟磁材料，因而硅鋼片又稱電工鋼片。硅鋼片廣泛用于電動機、發電機、變壓器、扼流圈、電磁機構、繼電器及測量儀表中電機工業大量使用厚度為0.35～0.50mm的硅鋼片,用于：中型旋轉機，壓縮電機，通用馬達，小型精密電機，電動汽車，壓縮機，通用電機，電源變壓器，精密變壓器，節能電機，焊機變壓器，穩壓器，磁性密封器，加速器用電磁鐵，汽車電機等；在電信高頻技術中常用0.05~0.20mm的薄帶鋼片,以便更有效地降低渦流損耗。熱軋硅鋼片厚度為0.35～0.50mm，密度為7.55～7.70g/cm3,多用于大、中、小型交、直流電動機；冷軋無取向硅鋼片厚度為0.35～0.50mm，密度為7.65～7.75g/cm3，多用于大型交流發電機、電動機，大、中、小型交、直流電動機；冷軋取向硅鋼片厚度為0.23mm 0.27mm 0.3mm 0.35mm，密度為7.65g/cm3,多用于電力變壓器、油浸式變壓器，干式變壓器，電抗器、磁放大器等；冷軋取向薄帶厚度為0.05～0.20mm，多用于無線電高頻變壓器。

電工鋼硅鋼片從2008年5月15日，寶鋼 卷合格取向電工鋼成功下線以來，寶鋼取向電工鋼品種迅速拓展至普通型、西藏當?shù)馗叽鸥行秃图毣女牳叽鸥行腿箢悺１臼謨跃C合介紹了寶鋼取向電工鋼的牌號、西藏當?shù)仄贩N、西藏當?shù)匾?guī)格、西藏當?shù)貞梅秶?、西藏當?shù)仉姶判阅堋⑽鞑禺數亓W性能、西藏當?shù)爻叽绨逍喂?、西藏當?shù)叵嚓P的使用技術及廣泛的應用業績，使用戶對寶鋼取向電工鋼產品能進一步了解，進而充分利用寶鋼電工鋼產品特性，生產出更加優良的下游產品。寶鋼可以提供從變壓器鐵心設計材料選擇到變壓器制造，包括：核心設計中的材料選擇，以控制性能和成本；從成本和性能角度優化鋼材和結構；為核心制造提供技術支持，以確保 性能；新產品和新技術，提高變壓器產品的競爭力。工作經驗：40多年前從事晶粒取向電工鋼，具有完整的研發、西藏當?shù)刂圃旌蛻媚芰Ξa(chǎn)品：產品種類繁多，包括對流、西藏當?shù)馗叽艑省⑽鞑禺數禺牸毣?、西藏當?shù)氐痛胖律炜s和無鉻酸鹽涂層晶粒取向電工鋼等級：鐵損P1.7/50低于0.55W/kg的 級能力：中國有史以來 家開發出具有制造100％優質晶粒取向電工鋼。晶粒取向電工鋼產量居世界 。寶鋼不斷更新和改進性能變壓器用產品數據庫，為自定義ers提供一系列來自機械性能的全套數據和基本磁性能下的特殊性質工作條件根據不同的要求，寶鋼可以為客戶提供性能數據原始曲線和其他形式的數據。GB20052-2020新能源效率一級產品S15-M-200/10、西藏當?shù)豐15-M-400/10變壓器成功投產用高等級GO電工鋼B18R055制造，B20R060，其空載損耗和負載損耗均滿足新的1級變壓器的要求。寶鋼高級晶粒取向電工鋼B27R090成功應用于雙百萬變壓器的制造ODFPS-1000000/1000用于超高壓交流輸電項目包括空載損耗在內的所有變壓器特性，空載電流和噪聲符合設計要求。寶鋼優質晶粒取向硅鋼B23R075已成功應用于轉爐生產昌吉-古泉±1100kV特高壓直流輸電變壓器 電網項目?？蛰d損耗、西藏當?shù)乜蛰d電流和噪音變壓器的各項性能完全符合技術要求。 無機涂層，S/T2 涂層為磷酸鹽和二氧化硅為主的無機成分混合物。該涂層具有較高的耐熱性，在干的氮氣或者干的氮氫混合保護氣氛中可以承受 850℃應力退火。對絕緣油、西藏當?shù)厍迤?、西藏當?shù)貦C械油、西藏當?shù)刂评錃怏w等有高耐腐性。 無 Cr 環保涂層,H,涂層成分中不含 Cr 元素