軟管泵的潤滑保養注意事項：
（1）側導輥每隔24小時用油槍從注油咀注油（高溫鋰基脂GB5671—91）一次，注油時注意側導輥的松緊情況，若發現過松，用尖咀鉗將其旋緊，使側導輥處于良好的潤滑狀態，如發現側導輥有異常聲音，經調整松緊，仍不能，應考慮側導輥內銅套是否磨損，將其拆下?lián)Q銅套。
（2）壓輥每隔三個月拆下來保養一次，給內腔和軸承加高溫鋰基脂（GB5671—91）。
（3）轉子軸承每隔三個月加高溫鋰基脂（GB5671—91）一次。
（4）新的減速機在運行一段時間后，將油箱內的機油放掉，重新加30＃機油。            

軟管泵可應用于多用移動泵站的結構 :自吸高度可達到9米，水平自吸可達200米以上，無需灌泵。特別適合于市政下水道系統的污水、污泥抽排。無堵塞、雜質通過能力強。普通的塑料袋、沙石、編織袋、泥漿、毛發等雜物都不會影響泵的使用。采用原輪泵，耐干運行，泵體堅固耐用、壽命長。使用快速連接接頭，方便進出口管道的裝配。 整車設計緊湊、適應于狹小空間使用。使用便捷拆卸式防雨布、或硬質鋼板隔音罩，低噪音設計，符合環保標準要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.